Sentence examples for band by using a from inspiring English sources

The amplitude envelopes (F1env and F3env) are then obtained by smoothing the Hilbert envelopes of each band by using a Hann window of 1 ms length.

This is the first time to report so high rate of single-photon emission in the telecom band by using a single InAs/GaAs bilayer QD.

The study estimates the LTV channel transfer functions over the whole frequency band by using a weighted average procedure, thereby providing validity for adaptive resource allocation.

Also, when the MS is close to the BS, the high speed transmission from the MS to the BS can also be achieved without taking any additional licensed frequency band by using a low transmission power.

By judiciously designing the superimposed pilot symbols, we estimate the LTV channel transfer functions over the whole frequency band by using a weighted average procedure, thereby providing validity for adaptive resource allocation.

The designed novel DC-PCF shows that it is possible to obtain a larger negative dispersion coefficient, better dispersion slope compensation, and confinement losses less than 10−4 dB/m in the entire S+C+L telecommunication band by using a modest number of design parameters.

The fatigue strength of aluminium welded joints with different geometries and thicknesses are summarised in a single scatter band by using an N-SIF-based approach.

Pairs of patterns were compared for matching bands by using a deviation of ±2.5% for molecular weight of each band.

Potentially, a high-order balanced M-band MWT may also be further improved (like a 2-band counterpart) by using a "packet" version (i.e., an M-band MWPT, as shown in Fig. 1).

In the first-stage of image formation, we produce a series of coarse-resolution images separately from each sub-band data by using a linear reconstruction algorithm, since the sub-band data are Nyquistly sampled.

The UMTS signal is based on spread spectrum Code Division Multiple Access (CDMA) [15], i.e., the original narrow-band signal from each user or base station is spread into a wide-band signal by using a channelization code (c i ) and scrambled by another code (S d l,n ), as it is depicted in Fig. 1.