Sentence examples for band angle from inspiring English sources
The kink band angle depended on the ratio of compressive to shear stresses.
Such are the kinking mechanism and the difference in the kinking mechanics between global and local imperfections, the determination of kink band angle and consideration of statistical distributions of fiber waviness.
The numerically obtained peak load, fiber microbuckling amplitudes, kink band angle and width, and compressive strain concentrations at the kink band edges were well predicted compared to the experimental results.
As for TM-doped blue phosphorene, the bond length d 3 decreases from Sc to Mn and then increases from Mn to Ni (see Fig. 2 d), while the band angle θ 3 shows an oscillating behavior (see Fig. 2 e).
The model is used to predict band angles and other characteristics of yielding in toughened plastics, including the conditions under which polymers yield without cavitating.
Kink bands at different stages of development are contained in the damage volume and the geometric parameters of fully developed kink bands are consistent through the damage zone, with a kink-band width ω ≈ 20 320 μm, kink-band angle β ≈ 11 40° and fibre rotation angle Φ (φ + φo) ≈ 18 52°.
Based on this, the conditions for the onset of shear banding instability are established, which enables the explicit calculation of the shear band inclination angle and its extension speed.
It was found that primary shear bands reach saturation after 7% in thickness reduction and only primary shear bands exist below 20% in thickness reduction, based on statistical analyses of primary shear band spacing, angle and offset.
The dynamic recrystallization was accompanied by the formation of disclinations, deformation bands, low-angle, and high-angle boundaries, i.e., rotational deformation modes developed.
This dual-band and angle independent near-infrared plasmonic perfect absorber has potential applications in infrared technology and devices, such as imaging devices, thermal bolometers, solar cells and wavelength selective radiators.
Individual grains of olivine within such rocks typically appear as oriented bands with angles of up to 10° between them.
