Sentence examples for backside of the chip from inspiring English sources
The measured gain center frequency is shifted about 300 MHz towards higher frequencies after thinning because of the image mirror currents within the conducting material at the backside of the chip.
Figure 3b shows that at a cutting length of 30 nm, there is considerable chip formed ahead of cutting tool, and the backside of the chip is straight due to the tight contact of formed chip with cutting tool rake face.
This module concept also envisages Inter-Chip-Vias (ICV) to extract the signals from the backside of the chips, thereby achieving a higher fraction of active area with respect to the present pixel module design.
To facilitate the flow-through process, silica (30 nm), which is hydrophilic, was deposited on the backside of the chips using electron-beam evaporation.
To minimise contact resistance, the metal backside contacts of the chips were electroless plated with gold.
Here we present a novel liquid-cooling concept, for targeted, energy efficient cooling of hotspots through passively optimized microchannel structures etched into the backside of a chip (embedded liquid cooling or ELC architecture).
This paper furthermore presents the role of the chip backside contamination affecting interfacial delamination, the surface characterizations and an explanation of the interface chemistry, and the strength of solders with a variety of plating materials for Sn Ag-based lead free Sn Ag-based
Drill two holes on the backside of the board using a countersink drill bit.
The fabrication of the microfluidic chips resulted in a chip of 1.5 mm × 3 mm, connecting a fluidic reservoir located on the front side of the chip, with storage capacity of 19.5 nL, to the hollow cantilever located on the backside.
