Sentence examples for backfilled with a from inspiring English sources
The tubes are evacuated and backfilled with a mixture of mercury vapour and an inert gas.
The trenches are filled with a bentonite clay slurry to prevent their collapse during construction, and they are backfilled with a mixture of soil and cement that solidifies to form an impermeable barrier.
In most of the world, borehole heat exchangers used with closed-loop ground source heat pump systems are backfilled with a low permeability grout to prevent water contamination.
After silanization, the capillaries were backfilled with a 15- to 20-mm column of electrolyte (15 mM KCl and 40 mM KH2PO4, pH 6.0 for H+; 100 mM KCl for anions; 100 mM CaCl2 for Ca2+) then front-loaded with a 20- to 25-μm column of a pH selective liquid exchange cocktail from Fluka (Milwaukee, WI, USA).
The solution proposed in this paper, based on the development of a life cycle cost model, fosters its application as a methodology to compare two mould manufacturing alternatives: a spray metal shell mould backfilled with a resin and aluminium powder resin and a conventional machined aluminium mould.
Electrodes (2 4 MΩ final resistance) were pulled from thin-walled borosilicate glass GC150TF (Harvard Instruments) and backfilled with a solution containing (mM): 110 Tris-phosphate dibasic, 28 Tris-base, 11 EGTA, 2 MgCl2, 0.1 CaCl2, 4 Na-ATP, pH 7.3 (adjusted with Tris base).
Pipettes were backfilled with an intracellular solution of 140 mM CsF/2 mM CaCl2/10 mM EGTA/10 mM HEPES/2 mM tetraethylammonium chloride/4 mM Na2ATP, pH 7.35.
Pipettes were backfilled with an intracellular solution containing 110 mM KCl, 10 mM NaCl, and 20 mM HEPES (pH 7.2) or the compounds to be tested.
Currently, the most commonly used method of shaft closure involves building dams and locking plugs in the area of insets and subsequently backfilling with a granular material.
"The [Alaska Department of Transportation] are backfilling with a whole bunch of gravel to keep the roads from collapsing".
The injection cannula was connected via PE20 tubing (backfilled with saline) to a Hamilton micro-syringe, driven by a microinjection pump (Harvard) that operated at a rate of 1 μl/min for 1 min.
