The phrase "axis of the plate" is correct and usable in written English.
It can be used in contexts related to geometry, engineering, or physics when discussing the orientation or central line of a flat surface or object.
Example: "The axis of the plate must be aligned with the center of the machine for optimal performance."
Alternatives: "centerline of the plate" or "midline of the plate".
Care was taken to align the hinges parallel to the long axis of the plate screws.
Once the plate was fixed on the distal radius fragment, the oval hole of the plate was used to center the proximal axis of the plate and a screw was inserted to hold the plate to the radial shaft.
The center of perforation was chosen at different locations along the principal major axis of the plate in order to evaluate the effect of hole location on the failure stress of the plate.
The foot was placed on the vibration plate orthogonal or parallel to the rotation axis of the plate.
On reaching confluency, a scratch was made through the central axis of the plate using a 10 μl pipette tip.
A scratch through the central axis of the plate was gently made by using a pipette tip.
A parametric study is then conducted, with a particular focus on the effects of GPL weight fraction, distribution pattern, geometry and size as well as the major to minor axis ratio of the plate on the thermo-mechanically induced stress and deformation fields.
Due to this difference, the direction of the tangential force around the rotation axis of the contact plate is different, and the load applied to the ground at the time of executing the wiping motion is different.
The polarization state of the beam that hits the surface of the Ag/Pd nanocomposite is determined by the angle φ between slow axis of the wave plate (n e) and the polarization azimuth of the incident beam (x′).
In Figure 3b, the zone axis of the hexagonal plate is [0001] and the six directions normal to the edge are < 2 1 _ 1 _ 0 > and its other five equivalent directions.
To produce right- and left-handed circularly polarised light, the optical axis of the wave plate was oriented at −45° or +45° relative to the optical axis of the linear polarisation filter.
