The phrase "axis of the machine" is correct and usable in written English.
It can be used in contexts related to mechanics, engineering, or machinery to refer to the central line around which a machine rotates or is organized.
Example: "The technician adjusted the axis of the machine to ensure smoother operation during the testing phase."
Alternatives: "shaft of the machine" or "pivot of the machine".
They consist of masses that are constrained to move along specific paths relative to the rotational axis of the machine.
The analysis showed that by rotation of the gripper around an oriented axis of the machine cylindrical part, the probability of the joint and process capability index Cp value can be increased from Cp=" 1.17 to Cp= 1.33.
THE recent introduction of the "Watts" jig borer microscope provides a valuable optical accessory for use with high-precision machine tools such as jig borers, and tool-room milling machines, Its purpose is to enable the axis of the machine to be accurately located in relation to a datum mark on the work-piece.
The graft was vertical to the loading axis of the machine so that the force was applied in line with the graft, testing the worst load scenario.
In the first pass the blade is set at an angle of about 50 degrees to the axis of the machine.
When this was not the case, subsequent measurements were taken by running the vertical axis of the servohydraulic machine in position control (instead of load control).
Feed error induced by the mismatch between the spindle motor and Z-axis motor of the machine can significantly influence the cutting loads during thread tapping process.
The main goal of this study is to develop a kinematic analytical model capable of correlating the work-piece geometrical errors to the axis geometrical errors of the machine tool.
Furthermore, the accuracy of the simultaneous multi-axis motions of the machining center is improved when the identified errors are corrected.
In vitro experiments were performed on the x-y-z axis of the CNC milling machine.
This paper presents a new error measurement method, a Dual Optical Path Measurement Method (DOPMM), to identify error parameters of the rotational axis of a machine tool along its error sensitive directions.
