Your English writing platform
Discover LudwigSuggestions(2)
Exact(22)
b The magnetic field dependence of magnetization for MnAs grown on GaAs (110) and GaAs (001) at 300 K, under a magnetic field applied along the easy axis of magnetization.
As seen from the comparison between the hysteresis loops in the IP and OOP directions shown in Fig. 2 a, the easy axis of magnetization for the Ni CNW network lies in the OOP direction; however, the magnetic behavior of the 3D networks in Fig. 2 b d become more isotropic as the Co content in the alloy progressively increases to the full Co CNW network.
This is the easy axis of magnetization in the basic structure.
It was found that the c-axis is the easy axis of magnetization for the two fct martensites and the hard axis of magnetization for the bct martensite.
For the spinel ferrite, the easy axis of magnetization was <100>, and the difficult axis was <111 > [29].
This shows that the easy axis of magnetization is along the nanowires while hard axis is normal to the nanowires.
Similar(38)
Magnetic measurement showed that easy x-axis of magnetization is along the parallel direction of the nanowires with coercivity of approximately 706 Oe.
Magnetic measurements showed that the easy x-axis of magnetization is parallel to the nanowires with coercivity of approximately 706 Oe.
The axis of easy magnetization can be turned from the growth direction (with a hh gas) to be in-plane (lh gas).
But if the magnetization axis of the anisotropic magnet substrate is perpendicular to the heat flux direction of the laser melting solidification layer, c-axis texture of the columnar Nd2Fe14B grains in the layer can be obtained, which is the same as that of the substrate, if the laser scanning rate is not less than 25 μm·s−1.
E_{A} = {text{K}} cdot {text{V}} cdot sin^{2} theta (3)where K is the anisotropy constant, V is the volume of the particle and θ is the angle between the particle magnetization and the easy magnetization axis of the particle.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com