The phrase "axial test" is correct and usable in written English.
It can be used in contexts related to engineering, physics, or medical assessments where a test is performed along an axis.
Example: "The engineers conducted an axial test to determine the strength of the material under pressure."
Alternatives: "longitudinal test" or "axis test".
Consequently, macroscopic deformation is a reflection of the type of strain path change represented by the post-ECAE axial test.
This result indicates that BRBs experience significantly different demands in a system than those imposed by simple axial test as required by the BRB prequalification test.
Slip activity differs in each grain and in each axial test, depending on its crystallographic orientation, orientation relationship with the previously generated substructure and pre-strain history.
Comparable data were obtained between the experimental results of the three piles and the presented simulation model in the case of axial test.
In two test runs the anatomical MDF plate allowed statistically significantly less motion than the antecedent MDF plate (800 N axial test and the torsion test with no axial pre-load).
Mechanical properties (strength and elongation at break) of initial and welded specimens have been evaluated by means of tensile axial test (according to DBN B.2.5-41 standard) with a 50 mm/min tension rate at room temperature with FP-10 tension machine (Germany).
With the exceptions of the FFR bone axial tests, the highest variability between specimens was 6.1%.
Existing experimental static axial tests performed by the second author on CHSs were used to assess BS 5950.
There are several difficulties in axial testing of pipe because of its geometrical features, such as hollow section and thin wall.
Very high cycle fatigue (VHCF) behavior of a low strength weldment was investigated by fully reversed axial tests in air at room temperature and 370 °C.
The gas bearing coal-sandstone combined samples were subjected to unloading tests, including unloading confining pressure (UCP) under constant axial tests and UCP-reloading axial stress (UCP-RAS) tests.
