Sentence examples for axial scanning from inspiring English sources

In the supine position, we effectuated axial scanning.

There are currently several techniques for higher speed depth-resolved axial scanning.

An axial scanning speed of 200 Hz is achieved (Fig. 4c), sufficient for overcoming motion artifacts for future in vivo imaging of live tissues.

To further demonstrate the axial scanning ability of this lens combination we imaged pollen grains without and with the ETL/OL lens assembly inserted at different axial positions while relocating the focus with the z-stage (Fig. 1 d,e).

Spectrally encoding depth enables simultaneous detection of reflectance signal from all points along the line focus, thus enabling significant increases in volumetric image acquisition speed while obviating the need for mechanical axial scanning.

However, previous demonstrations of axial scanning with SSTF are either at too slow a scanning speed or too small an axial scanning range for practical application.

Recently axial scanning has been used for tube bending instead of commonly used circumferential scans.

Scanning was performed with the following parameters: 80 kV, 70 mA, gantry rotation time of 2 s, 144-mm table height, and axial scanning mode.

Axial scanning acquires multiple volumes, and is used in particular when performing ECG-gated studies such as coronary and aortic CTA, to help reduce radiation dose [4].

The actuation of the four-quadrant piezoelectric membrane involves driving of two orthogonal electrodes with AC signals for lateral scanning, while simultaneously driving all electrodes for axial scanning and focus adjustment.

When axial scanning is used for volumes larger than the detector width, the total scan time is equal to the total number of volumes required to cover the desired anatomical area multiplied by the gantry rotation time, added to the sum of the interscan time intervals required for table repositioning.