The phrase "axial depth" is correct and usable in written English.
It is typically used in technical contexts, such as engineering or machining, to refer to the measurement of depth along an axis.
Example: "The axial depth of the hole must be precisely measured to ensure proper fit for the component."
Alternatives: "depth along the axis" or "axis depth measurement".
The M-scans consist of time-stamped optical spectra whose Fourier transforms provide depth-resolved images (i.e., maps of scattering intensity versus axial depth) and vibration information (i.e., maps of scatterer-displacement versus axial depth).
An empirical dependence is proposed to calculate the axial depth of penetration the counter flow jet.
For this quantum well structure we predict a FWHM diffraction-limited, aberration-free axial (depth) resolution of 1.7 μm for an excitation wavelength of 830 nm and emission wavelength of 460 nm (see supporting information).
The three other parameters are axial depth of cut, radial depth of cut, and feed of cut.
In this work, the effects of varying four parameters in the milling process, namely cutting speed, feed rate, radial depth and axial depth.
The critical axial depth of cut and stable spindle speed ranges for chatter occurrence are influenced by dynamic stiffness and natural frequency of the milling toolholder.
Machining parameters such us spindle speed, feed per tooth (mm/z), axial depth of cut and radial depth of cut deeply affect both dimensional precision and surface quality.
The influence of cutting speed, feed per tooth, axial depth and radial depth of cut is studied using a 24−1 fractional factorial design of experiments.
The considered flank milling parameters include the coolant employment, number of end mill flutes, cutting speed, feed per tooth, axial depth of cut, and radial depth of cut.
The tests are performed at several feed rates (f) while the axial depth of the cut and cutting speed remain constant in dry cutting conditions.
Large axial depth of cuts used in the flank milling of gas turbine impellers result in severe chatter vibrations and high cutting forces.
