The phrase "avoid buckling" is correct and usable in written English.
It can be used in contexts related to construction, engineering, or any situation where structural integrity is a concern.
Example: "To ensure the stability of the structure, it is crucial to avoid buckling in the beams."
Alternatives: "prevent deformation" or "stop warping".
A feasible scheme of the acrylic sphere was proposed to avoid buckling failure.
Instead of conventional shear keys of hybrid systems, an epoxy resin bonding technique is adopted to assure composite effect between FRP and concrete and hence avoid buckling failure mode of FRP shell.
The test section is rectangular with a half width, W, and half height, H, and a constant thickness, B. The height to width ratio, H/W, of the specimen must be kept low to avoid buckling during compressive loading while ensuring that the stress-intensity parameter values are not strongly dependent on the chosen H/W value.
A static load was superimposed to the oscillating force in order to avoid buckling.
The faster the muzzle velocity, the stronger the rails must be, both to avoid buckling and to resist erosion from the friction created by the accelerating armature.
Usually, the struts are in compression, they should be designed to avoid buckling, but few researches can be found about the lateral buckling of the struts in the BSS.
Maybe you should sort your life out, you think, narrowly avoiding buckling one-legged into the road.
If you wear boots, maybe avoid buckles.
In this paper a new initial stressing method is presented whereby the natural frequencies of all zero nodal circle modes increase simultaneously, thus avoiding buckling of the plate through excessive initial stress.
The introduction of packing plate at bolted connections distributes load over wide area of cold form channel webs and also avoids buckling of web element and hence increases the load carrying capacity of the joint.
The height of the walls is determined in order to avoid the buckling effect of walls.
