The phrase "avoid blockage" is correct and usable in written English.
It can be used in contexts where you want to prevent an obstruction or hindrance, such as in discussions about traffic, plumbing, or communication.
Example: "To ensure smooth traffic flow, it is essential to avoid blockage on the main roads during peak hours."
Alternatives: "prevent obstruction" or "stop blockage".
The proposed PET scanner consisted of 14 detector modules arranged in a C-shape to avoid blockage of the particle beam line by the detector modules.
A minimum marsh width of 6 10 km is required to completely avoid blockage effects for the storm tidal cases assessed in this study.
The inclined fluidized beds, compared to the erect fluidized beds, have a lower pressure drop and a better circulating effect, and the vertical connecting pipes maximize the transport rate of the particles and avoid blockage.
Hence, the experiment for rotor A was useful in the verification of the limitations of rotor dimensions to avoid blockage effects.
To avoid blockage, the limiting resource is identified (CEs, Iub, or WCDMA carriers) for a specific traffic demand, so network operators can properly manage the capacity provisioned at each resource.
Universal Mobile Telecommunications System UMTSS) network equipment reports key performance indicators (KPIs) related to capacity shortage, such as failed connection attempts, but no clue is provided in order to detect the limiting resource or a subsystem malfunction, nor is any advice given on how many resources to provision in order to avoid blockage for a certain forecasted service demand.
Performances were improved (−0.85 and −1.1 A cm−2 for CO2 and H2O electrolysis, respectively) by substituting the silver current collector with nickel and avoiding blockage of entrances to pores on the inner lumen of micro-tubes induced by silver paste applied previously to decrease contact losses.
This helps avoids blockage of the blender's blades caused from the fruit.
Then, some blades are trimmed at the beginning to avoid inlet blockage.
8 mm direct detector receivers were connected directly to the feed horn antennas to avoid undesirable blockage.
The model is believed to be useful in predicting minimum conveying velocities to avoid pipe blockage and to ensure optimum operating point for industrial pneumatic conveying systems.
