Your English writing platform
Discover LudwigThe phrase "avg flowing" is not correct in standard written English.
It appears to be an abbreviation or shorthand that lacks clarity and context.
Example: "The avg flowing rate of the river was measured at 5 cubic meters per second."
Alternatives: "average flow" or "mean flow rate.".
Exact(2)
Well type: vertical Perforation interval: 4347 4600 ft Midpoint perforation: 4473.5 ft Tubing size: 4.5 in R w: 0.350 ft Casing (ID): 7 in Static Well head temp: 75 degree F (avg) Flowing Well head temperature: 95 degree F (avg).
Well type: vertical Perforation interval: 4373 4649 ft Midpoint perforation: 4511 ft Tubing size: 4.5 in R w: 0.350 ft Porosity: 30 % Casing (ID): 7 in Static Well head temp: 75 degree F (avg) Flowing Well head temperature: 95 degree F (avg).
Similar(58)
AVG flow rates <600 mL/min and AVF flow rates <400 mL/min are considered evidence of failure risk and result in continued surveillance and or further investigation.
Flowing Well head temperature: 95 degree F (avg).
While a φ 0.90 mm DE droplet flows in an avg.
Following 4 days static culture, BMSC-seeded scaffolds were loaded into a novel flex-stretch-flow (FSF) bioreactor and incubated under static (n= 12), cyclic flexure (n= 12), laminar flow (avg. wall shear stress=1.1505 dyne/cm2; n= 12) and combined flex-flow (n= 12) conditions for 1 (n="6) and 3 (n="6) weeks.
Our results with per-flow rate limiting at the gateway are shown in Table 3. Table 3 Per-flow rate control for UDP flows in a three-hop parking lot topology with gateway n 0. Traffic type Flow avg.
So shame on you AVG.
k t can be obtained by the following correlation: k_{t} = frac{N}{{C_{text{avg}} - C_{text{s}} }} (3)where N is mass flux and the denominator term indicates the difference between average asphaltene concentration in bulk flow (C avg) and surface (C s).
Therefore, we simply used the time average of optical flow-based vectors, v j avg, for human motion features and the time average of chroma vectors, m j avg, for music features.
The corresponding flows are Q i C and Q i R. The metrics ∈ P, avg and ∈ Q, avg are the average relative errors in pressure and the flow, respectively, over one cardiac cycle; ∈ P, sys and ∈ Q, sys are the errors for systolic pressure and flow; and ∈ P, dias and ∈ Q, dias are the errors for diastolic pressure and flow.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com