Sentence examples for averaging factor from inspiring English sources

The Integrator Handover Algorithm (integratorHO) [10] uses trigger threshold and averaging factor to make the handover decision.

The following parameters are used by many of the described models: σref is the standard deviation of the signal amplitude, f is the operational frequency, g(x) is the antenna averaging factor, θ is the antenna elevation angle, H is the surface humidity, and t is the surface temperature (°C) (Mandeep and Hassan 2004).

The fixed B cells were allowed to rest on cover slips and then imaged at 63× magnification using a Zeiss Apochromat objective with averaging factor of 4 to increase the Signal-to-noise ratio.

Ψ i t ¯ and r ¯ j t are estimated mean firing rates of mEC unit i and place unit j that are adjusted at each time step of the simulation: (7) Ψ ¯ i t = Ψ ¯ i t − 1 + η (Ψ i t − Ψ ¯ i t − 1 ), r ¯ j t = r ¯ j t − 1 + η (r j t − r ¯ j t − 1 ), with η = 0.05 a time averaging factor.

The averaging factor α and FDIFThreshold are two key factors dominating the performance of the integratorHO algorithm.

The relative importance of the current and prior measurement period in deciding FRDIF t) and FHDIF t) is controlled by the averaging factor, β.

Mr. Fisher also called for less reliance on "smoothing," the practice of averaging factors over several years when pension values are calculated.

Figure 3B shows averaged factor loading values for all wounds harvested at a particular time-point.

(C1 ), scatter plot representing the factor loadings of the 263 P2–P29 neurons (gray circles) and the averaged factor loadings for each developmental stage (colored circles).

Circuit analysis allows selection of optimum resistance and capacitance averaging factors to achieve maximum offset reduction in ADC designs.

Equation 11 can be simplified by considering only binary averaging factors, a.