The phrase "averagely increases" is not commonly used in written English and may sound awkward to some readers.
It can be used when describing a situation where something increases to an average level, but it is better to use more standard expressions.
Example: "The temperature averagely increases during the summer months."
Alternatives: "increases on average" or "increases moderately".
The results showed that load-carrying capacities of CFRP reinforced beams may averagely increase about 27% compared to unreinforced members.
The proposed dynamic CAC algorithm plus adaptive BR scheme averagely increase the network efficiency by 19.71 and 19.95% over the FT and DT schemes, respectively.
Experimental validation shows that inclusion of a floating metallic sleeve on dual slot antenna for hepatic microwave ablation averagely increased ablation diameter and aspect ratio by 17.8% and 33.9% respectively and decreased ablation length by 11.2%.
As the prestressing level ratio of f t /f tk increases from 0.0 to 0.75, the αt (or αm) value was averagely increased by about 26 37% (or 26 29%) for the steel strand under different low temperatures varying from 0 to − 160 °C.
The experiment results showed that compared with the temperature of the conventional PV panel, the temperature of the PV-PCM panel is kept below 50 °C for 200 min extended by 146 min with output power averagely increased by 7.28% in heating process.
By averagely, the increase in transportation costs is less than 20percentt, even though the variation is large between these four markets due to different modes and modality.
In general when the arrival rates λ (λ = λ h + λ n ) varies from 0.4 to 0.9, our proposed scheme averagely can increase the network efficiency by 13.09 and 7.93% in comparison with the FT and DT schemes, respectively.
As a result, our approach (dynamic CAC algorithm and adaptive BR scheme) averagely can increase the network efficiency by as large as 19.71 and 19.95% over the FT and DT schemes, respectively, with various values of arrival rates.
The optimal results indicate that the heat transfer coefficient per unit pressure drop increases averagely by 14.1%, the maximum shear stress decreases averagely by 4.1%, which provides theoretical guidance for industrial design of shell-and-tube heat exchangers with helical baffles.
Averagely speaking, the increase of CeO2 content gives rise to the increase of thermal expansion coefficient and the reduction of thermal conductivity, but La2(Zr0.7Ce0.3)2O7 has the lowest sintering ability and the lowest thermal conductivity which could be explained by the theory of phonon scattering.
