Sentence examples for average wear rate from inspiring English sources
After 4.5 million cycles of 'mug to mouth', the average wear rate of the test components was 14.3 mm3/million cycles.
The composite coatings with hardness between 976 and 1167 HV exhibited average wear rate between 5.91 and 6.60 × 10−4 mm3 (N m)−1.
The average gravimetric wear rate was 14.5 mg/Mc, whereas volumetric changes in reconstructed µ-CT scans point to an average wear rate of 15.76 mm3/Mc (18.8 mg/Mc).
The test result showed that the average wear rate of the uncoated blades was 0.86 cm3/ha, while those of the WC/Co and the Al2O3 coatings were 0.02 and 0.90, respectively.
Furthermore, compared with the untreated sample, the average wear rate of the laser shocked samples is decreased by 32.1%, 45.3% and 69.8% corresponding to laser energy of 6.5 J, 8.5 J and 10.5 J, respectively.
The average wear rate of the composite coating is approximately 1.2 1.5 times of that of the single TiN coating and 2.6 2.7 times of that of the TC11 substrate, respectively.
The average wear rates of composite coatings determined by sliding wear test were lower than that of monolithic Al2O3 coating by approximately 40%.
The average wear rates for each material and each maturation medium are shown in Table 2.
The average polyethylene linear wear was 2.40 mm, whereas the average annual wear rate was 0.25 mm/y.
Average yearly wear rate was 0.079 mm (range, 0-0.31mm).
The best clearance range was between 0.1 and 0.15 mm where the average linear wear rate was 0.1 mm/yr and the volumetric wear was 55 mm3/yr.
