Sentence examples for average wall temperature from inspiring English sources

Figure 6 Average wall temperature of the evaporator using functionalized nanofluid.

The Nusselt numbers were obtained with the average wall temperature to analyze the heat transfer characteristics.

The results show that the high average wall temperature can be achieved at slightly oxygen rich mixing ratios.

In addition, for the optimal baffle thickness, the concurrent increase of 6.3% in the average wall temperature and 87.5% in the temperature uniformity are achieved.

Fig. 9 Evolution of the average wall temperature with time (it took about 6000 s for the system to reach steady state, and only stable data is shown in the figure).

It is concluded that the fuel blend with 70% hydrogen and 30% methane could improve the average wall temperature, temperature uniformity, and combustion efficiency by 60 K, 73%, and 4.5%, respectively.

As is shown, the average wall temperatures using functionalized nanofluid decreases compared with the water case.

Not plotted in this paper, the average wall temperatures hold the same trend at other operating temperatures.

The experimental and simulation results confirm the great potential for the application of the SFT technology in steam cracking furnaces because of the lower average wall temperatures and the resulting reduction of coke formation in the reactor coil.

Table 3 Wall thickness of rings with increased printing temperature Print temperature [°C] Average wall thickness [mm] Difference from CAD model 240 2.09 4.5 2452.092502.0150 2.06 3.0 255 2.01 0.5 260 1.94.5 2452.092502.01

So, it was found that the average thermal gap in the heated channel (the wall temperature minus the average temperature of the coolant fluid) was strongly correlated with the efficiency of a theoretical reversible engine placed in this thermal gap.