Sentence examples for average tensile strength from inspiring English sources

The average tensile strength of the joint is 148 MPa.

The furnace brazed joints show the average tensile strength of 348.5 MPa.

The average tensile strength of concrete specimens of size Ø100 × 50 mm are presented in Fig. 8.

The average tensile strength of six specimens was measured for each test variable and is summarized in Table 2.

Results show that, for long term applications, the average tensile strength isn't enough to guarantee project safety.

Results show that the average tensile strength is not enough to guarantee project safety, for long term applications.

The average tensile strengths of the normal D13 and D19 GFRP bars were found to be 1120.2 and 903.4 MPa, respectively.

The results find average tensile strengths of 28.5 MPa for ABS and 56.6 MPa for PLA with average elastic moduli of 1807 MPa for ABS and 3368 MPa for PLA.

Superior adhesive bonding to the Ni Cr alloyed metal substrate was achieved via a heating process at 150 °C, and high average tensile strengths of ∼80 MPa were obtained by using mixtures of BOEs and dl-tartaric acid.

Additionally, the fiber that was subsequently derived from the MN soluble fraction had satisfactory mechanical properties with an averaged tensile strength of 1150 MPa after heating to 800 °C for 5 min.

The highest average strength curve was chosen using the mean tensile strength values from (Reilly and Burstein 1975).