Sentence examples for average surface porosity from inspiring English sources

Meanwhile, the average surface porosity is almost the same for all pores.

Primary visceral foramen, intergranular dissolved pores, intragranular dissolved pores, and intercrystalline dissolved pores are 2.15 % 3.45%% in average surface porosity (Fig. 4), not differing much.

The average surface porosity of visceral foramen, intergranular dissolved pores, and intragranular dissolved pores are 1.8%%, 5.24 %, and 0.46 % respectively, and less than 0.1%% for other types of pores (Fig. 4).

We used the spectroscopic liquid infiltration method (SLIM) to determine the thickness and total open porosity of the etched films and found average open porosities of 60% for samples 1 and 2 and 40% for sample 3.

In fact, NTs 15 nm owns a higher average surface roughness (Fig. 2), a higher surface porosity (Fig. 1), a higher total length of sharp edges of NT walls per unit top surface area (see also [9, 10, 25]), and the highest (accessible) surface area.

Microstructural parameters including crystal size (d) and shape (M), apparent surface porosity (Ra) and average grain boundary (G) are used to quantify the membrane surface morphology.

A HZG in-house manufactured polyacrylonitrile (PAN) microporous membrane with an average pore size of 25 nm and with 15% surface porosity was used as a support for thin film composite membrane formation.

The predicted pressure modification coefficient may be used to estimate average pressure coefficients taking into account the indoor velocity coefficients, surface porosity, window design, and interior partition types.

Open image in new window Fig. 5 Correlation of authigenic grain-coating chlorite content with: a surface porosity; b primary intergranular porosity; c solution porosity; and d sample porosity.

Almost entire surface porosity was filled with new dense bone.

Deep rooted fibre surface porosity was revealed by AFM.