The other is the interval, or frequency of service: the average round-trip time of one elevator, divided by the number of elevators.
This paper is concerned with the design, the validation and the experimental testing of improved AQM control schemes to cope with unwanted variations of characteristic parameters such as the average round-trip time, the load and link capacity.
Furthermore, in a congested IEEE 802.11b network setting, compared with the use of three non-overlapped channels, the aggregate network throughput can further be increased by 25% and the average round-trip time can be reduced by more than one half when all the 11 partially-overlapped channels are used.
The used average Round-Trip Time (RTT) is an estimation between 50 and 70 ms depending on the received packet loss ratio.
The average Round-Trip-Times (RTTs), estimated using the ping command, are 50.2 ms, 51.7 ms, and 167.8 ms, respectively, for the Ethernet, WiFi, and UMTS backhauls.
Three TCP/IP metrics are selected as candidate predictors, namely average downlink throughput (THRU), overall downlink packet loss ratio (PLR), and average downlink round trip time (RTT), all of them measured at the IP level.
Each rttij in the matrix RTT, represents the expectations of the round trip time between the device in network i and cloud resource j, and it takes a weighted average of the history data RTTij, as shown in formula (5).
In such a case, keeping a single round trip time (RTT) estimator for a multi-path flow is insufficient as each path may experience different round trip times.
Third, the source dynamically adjusts traffic to these LSPs based on individual round trip time.
This in turn involves the accurate calculation of the round trip time of a single elevator.
That beats Southampton, who cover 6,628 miles, an average round trip of a mere 350 miles.
