Sentence examples for average production yields from inspiring English sources

Reischl et al. (Reischl, Roesch, and Machulla, 2002) irradiated a 95.6% enriched solid 86SrCO3 target with 15.1 MeV protons which resulted in average production yields of 48 MBq/μAh with a radionuclidic purity of > 99% at EOB.

The average production yield (decay and generator yield corrected) was 66.5%.

The average production yield was measured to be 356 MBq μA−1 h−1.

The average production yield of raw centrifugal per ton of milled cane is 0.106 to 0.12 ton.

To determine the effect of salts on ethanol production, metabolic yields and average volumetric production rates of ethanol were calculated.

Based on average dry matter yield, total production area needed for annual harvesting was estimated.

The modified Ratkowsky model can be used to describe the combined effects of the temperatures and initial pH on the substrate degradation efficiency, hydrogen yield and average hydrogen production rate.

The analysis showed that the neural network could successfully describe the effects of temperature, initial pH and glucose concentration on the substrate degradation efficiency, hydrogen yield and average hydrogen production rate of this study.

The average biogas production was 1.2 m3biogivingy, giving average volumetric production rate of 0.16 m3biogandm3digester dayieldsd yields of 0.18 m3biogas/kg VS respectively.

The response plots resulted in the following optimized conditions; Karanja oil (23.85 g/L) sodium nitrate (9.17 g/L) and pH (7.8) which yielded an average biosurfactant production of 5.90±2.1 g/L at 48 h, and 37 °C temperature.

Regarding yields per entire tree, the average estimated fig yield for female trees, YF, indicated that 98.13, 1.06, and 0.08 % of the fig production was located on the twigs, trunks, and branches, respectively (Fig. 3).