Your English writing platform
Discover LudwigExact(1)
Experiments are carried out behind reflected shock waves at average pressures of 3.5, 5.0, and 11 atm over a temperature range of 1150 1550 K.
Similar(59)
The minimum no-load temperature of 4.4 K was obtained with a pressure ratio near 1.5, working frequency of 2.2 Hz, and average pressure of 1.73 MPa.
For example, one particle was produced and observed for over 6 min at an average pressure of 15.022 MPa and an average temperature of 5.1 °C.
A lowest no-load temperature of 15.1 K is obtained with a pressure ratio of 1.18, a working frequency of 3 Hz and an average pressure of 2.45 MPa.
Beam current reached the designed target 200mA/3.5GeV in October 2008,the average pressure of storage ring is 1.52×10-7Pa.After running for several months, the dynamic pressure went down to 6.8×10-8Pa,which is much lower than the designed target.
The time-dependence of cavity penetration has also been approximately modelled in the case of PMMA embossed at 110 °C under an average pressure of 8 MPa for up to 10 min.
Sub-micron radii of curvature at the resin interface were measured corresponding to local negative pressures up to several atmospheres and an average pressure of −10 to −50 kPa.
The unimolecular decomposition rate of 1,3,5-trioxane was determined over 869 1037 K at an average pressure of 2.1 atm: kI = 3.58 × 1012 exp (−18,590 K/T) s−1, with an overall uncertainty of less than 20%.
= Average pressure of gas column.
Calculate the average pressure of gas column, p ¯ gas.
For each simulation, we also indicate the average pressure of the constant volume calculations.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com