The phrase "average operating conditions" is correct and usable in written English.
It can be used in contexts related to performance, engineering, or scientific discussions where typical or standard conditions are being described.
Example: "The machine is designed to function optimally under average operating conditions, ensuring efficiency and reliability."
Alternatives: "normal operating conditions" or "standard operating conditions".
Because vendors adjust GPS modules to cover "average" operating conditions, they have the capability to adjust designs or parameters for unusual operating conditions.
The results were compared with the ones obtained using a traditional GEP model, which assumed average operating conditions for thermal power plants.
The results suggest that assuming average operating conditions can result on the underestimation of the system costs which highlights the importance of the proposed integrated model to strategic decision making.
Diffusional limitations on the various reactions were accounted for through effectiveness factors, averaged over the operating conditions and calculated from a number of off line pellet simulations.
Despite only considering stationary operating conditions and average battery parameters, the result is close to that of deterministic dynamic programming.
For the same base case parameters and operating conditions, the average current density of ASC is 6388 A m−2, only 83% of the ACSC, 7713 A m−2.
Under stable operating conditions, the average gaseous N2O concentration in the sequencing batch reactor was about 0.36 ppm, accounting for 0.44% of the total ammonium oxidation.
A detailed analysis reveals that some parts of the receiver aperture achieve an ARR above 90% at well-selected operating conditions, but average values hardly surpass 70%.
The best equipment sizes, operating conditions, and average chain length of the solvent (the n-alkane) are identified, indicating n-alkane solvents offer a promising alternative.
Under these operating conditions, the average flux of the membrane was 19.2 LMH, which was much higher than the normal flux (<15 LMH) adapted for membranes receiving seawater feed from an open intake.
Several factors that need to be considered during pipe selection include quality of the fluid to be pumped, required design capacity (initial minimum, average, and maximum flow rates), operating conditions (best-case and worst-case system head curves, maximum and minimum flow rates, submergence, and/or NPSH).
