The phrase "average flow rate" is correct and usable in written English.
It can be used in contexts related to fluid dynamics, engineering, or any situation where measuring the flow of a liquid or gas is relevant.
Example: "The average flow rate of the river was measured to be 500 cubic meters per second."
Alternatives: "mean flow rate" or "typical flow rate".
Annual average flow rate, as used in the wastewater provisions, means the annual average flow rate, as determined according to the procedures specified in § 63.144 c).
In a lateral sewer, short-term peak flow rates can be roughly four times the average flow rate.
Measurements were acquired for three points corresponding to each pressure difference point, and the average flow rate is plotted.
The CPW was applied at an average flow rate of 0.020 m3 d−1, corresponding to a hydraulic retention time of 12 days.
The interaction of vacuum level and ratio was significant for milking duration, peak flow rate, and average flow rate, but not for milk yield.
The average flow rate in this flow apparatus was 2.8 ml/s, mimicking the flow rate (2.6 ml/s) in coronary artery.
The initial cold water was not replaced up to 2 h with the average flow rate 0.2 cm/s in a 4 × 4 cross-sectionalonal duct.
These arrangements allowed direct comparison of flows with the same fuel, average flow rate, degree of premixedness, and overall equivalence ratio and different amplitudes of oscillation.
The data used in this work were obtained from a major conventional treatment plant in the Greater Cairo district, Egypt, with an average flow rate of 1 million m3/day.
The volume of saliva collected in the first 5 min was three times greater than that collected between 15 and 20 min. The average flow rate for a collection period of 15 min was 16.7±1.8 μl/min (n=10).
It still lacks a relevant method to make a rapid performance estimation according to some typically switched networking features, such as networking scale, bandwidth utilization and average flow rate.
