Sentence examples for attributed to the cracking from inspiring English sources

Hence, for the cracking of Au@DSHPG (Fig. 4b), the weight loss peak at 400 °C is attributed to the cracking of HPG, and other weight loss peaks should be attributed to the cracking of the polymer shell of DSHPG.

The data show that boiling range of product of all kinds of types decrease, which could be attributed to the cracking function of HZSM-5.

The remarkable improvement in fracture toughness of laminated TSG ceramic is attributed to the crack deflection, crack branch and interface delamination (stress relaxation near the crack tip).

It can be attributed to the cracks formed on the deposited Al2O3 film, as shown in Figure 3, which also reduce the water contact angle.

This is attributed to the crack arresting effect of a resolidified ceramic layer that partially lines the hole.

The cleavage plane, which is attributed to the cracks propagated along the interfaces of γ/γ′phases, displayed square-like, rhombus-like and hexagon-like feature for [001], [011] and [111] orientation, respectively.

Short-term durability studies revealed that the degradation of cell performance was attributed to the crack formation on the LSC current collector layer and the delamination between NNO-CGO cathode layer and LSC current collector layer.

This is likely attributed to the crack deflection mechanism, which is weakened by the strong interfacial bonding between the CaCO3 whisker and cement matrix in the stronger mortar matrix.

The measured root lengths were larger when using the soil core method than with the minirhizotron (2.5 mm cm−3 versus 1.3 mm cm−3), which can be attributed to the cracks that occur in Mediterranean Vertisols that can separate the tube from the soil, resulting in the underestimation of the root length.

Most crime could be attributed to the crack epidemic, but the administration's priorities were clear: imprison the drug users, don't worry about rehabilitation or prevention.

Overall improvement in fracture toughness (7.8 ± 0.8 Mpa m1/2) and bending strength (782 ± 60 Mpa) was obtained in the composite, which should be attributed to the improved crack bridging and crack deflection after interfacial modification.