Sentence examples for attributed to the boundary from inspiring English sources

This difference among the components may be attributed to the boundary conditions.

The low precipitation during the early Holocene can be attributed to the boundary conditions, i.e., to the remnant high-latitude Northern Hemisphere ice sheets and the relatively low global sea level.

This may be attributed to the boundary condition that we used in our simulation; in our simulation, we have utilized the fully clamped boundary conditions such as ψ(x y) = ∇ψ(x y) = 0 along all edges; this boundary condition is referred to as "fully clamped" boundary condition.

Detailed investigation has revealed that the electrocatalytic capability of this catalyst can be attributed to the boundaries between Cu and Cd that could provide sufficient active sites for the CO2RR and the formation of Cu2Cd alloy that could enhance the binding energy between the catalyst and the intermediate.

The semicircle in the lower frequency region is attributed to the grain boundary conduction which occurs due to parallel combination of the grain boundary resistance R gb and grain boundary capacitance C gb of the material (Barik et al. 2011; Dasari et al. 2011).

This is attributed to the network boundary strengthening mechanism as elucidated by the microstructure property fractographic analysis.

The observed phenomenon was attributed to the altered boundary layers of the calcium diffusion at the brushite surfaces when the pH changed, arising from the conformational change of poly ethylene imine) combined with the charge reversal of brushite surfaces.

The main contribution to the mechanical strength of the alloys is attributed to the grain boundary strengthening in Cu referring to the Hall Petch relation, which is quantified.

Such enhancements of the mechanical properties of the B4C-dispersed Bi0.4Sb1.6Te3 are attributed to the grain boundary hardening and second-phase hardening.

The results show considerable changes of the mean force coefficients with Reynolds number ReD and spin parameter SP, which can be attributed to the altered boundary layer separation.

In the rotating-state, considerable changes of the mean force coefficients with Reynolds number ReD and spin parameter SP occurred, which can be attributed to the altered boundary layer separation.