Sentence examples for attenuator setting from inspiring English sources

XRR data were reduced by stitching together the data for each attenuator setting used at the appropriate overlap regions, correcting for background, and scaling the data so the reflectivity at the critical edge is unity.

This is used to make level measurements, while the detector and VSWR meter are retained only to mark a reference point for the attenuator to be set to, thus eliminating entirely the detector and meter measurement errors.

All operations involved in the measurement were automated, that are: i) moving the optical inhomogeneity using a translating stage; ii) adjusting the gate delay; iii) rotating the circular variable attenuator to reduce injected power at early delays; iv) setting the intensifier gain; v) acquiring and saving the images.

Output from the dye laser was passed through an eight-way beam splitter, and the power of each beam was set individually with Brewster window-type attenuators.

The JFW Industries 50BR-104 N attenuator (JFW Industries, Indianapolis, IN, USA) was used which was set to 0 dB during measurement.

In this study, both the attenuation level in the programmable attenuator and the phase delay of the programmable phase shifter are set to zero.

The laser power and exposure time are set at 240 mW and 30 ms by an attenuator and a shutter, respectively.

The gain volume of the pre-amplifier is always set to be maximum at all the PWING stations, while the gain volume (attenuator) of the main amplifier is adjusted depending on the noise level of the stations.

Progression predictors and attenuators might inform the design of an emergency strategy to ameliorate severe PPH which otherwise looks set to continue rising.

ORF search was set at a minimum protein length of 48 nt, which is known from the leader peptide of ilvB transcriptional attenuator [ 42], up to 249 nt.

An optical attenuator is used to adjust the intra-cavity losses for dual-wavelength laser generation.