The phrase "attenuation requirements" is correct and usable in written English.
It can be used in contexts related to engineering, telecommunications, or any field where signal strength and loss are discussed.
Example: "Before proceeding with the installation, we need to ensure that all attenuation requirements are met to maintain signal integrity."
Alternatives: "signal loss criteria" or "reduction specifications".
In this paper, to maintain robust performance requirement, tracking performance specification, and disturbance attenuation requirement, the design of a robust force controller for the new hybrid actuator using quantitative feedback theory (QFT) is presented.
However, with the 60-dB stopband attenuation requirement, an additional filter section providing a transition band zero, as described in Section 3.2, is needed to reach the specification.
Correcting for attenuation is an essential requirement to perform an accurate quantitative analysis of PET data.
Since transient noise reduction systems should act in addition to traditional noise reduction, they are a good example for the superposition of additional attenuation according to requirement 1.3 from Table 1.
Attenuation correction is an essential requirement for quantification of PET data but MRI images do not directly provide a patient-specific attenuation map.
In the second stage an optimisation problem is solved to determine the free parameter such that the disturbance attenuation and the fault identification requirements are accomplished.
Utilization of a disturbance observer (DOB) for enhancing track-following precision simplifies the compensator design procedure by removing the requirement for disturbance attenuation from the compensator design specifications.
An additional requirement is that the attenuation should be uniform across the transmission window.
However, the quality of the USRP platform is not at the same caliber as an actual commercial base station, where higher-quality equipment is installed, and where there are high requirements for the OOB power attenuation.
Category 1 and 2 cables can either meet the required parameter specifications for interpair skew, far-end crosstalk, attenuation and differential impedance, or they can meet the required nonequalized/equalized eye diagram requirements.
