In particular, the circuit developed in this work attains higher efficiency (92% peak, and >80% over a load range of 5 mA to 1 A) than surveyed competitive buck converters, while requiring less board area and less costly passive components.
In order to attain high efficiency, carefully matched loading and unloading terminals are necessary.
The DBI consists of unidirectional and bidirectional switching legs, which are operated at different frequencies to attain high efficiency.
Inherent characteristics of Ti 6Al 4V alloy promote rapid tool wear, which needs to be curbed in order to attain high efficiency in metal cutting.
It is evident that there is a need to develop turbines that can operate under off-design conditions while attaining high efficiency.
The result established the basis for heat transfer modeling of micro impeller purposing implications for design modification in order to attain high efficiency and better performance.
Since its publication in the 1960's, it has given rise to a new era in loudspeaker design in which it has been possible to attain high efficiency without false resonance and reach impressive loudness levels without overstraining the limited power reserves of smaller amplifiers and receivers.
These results have great significance because they demonstrate the applicability of the electrochemical technology in the treatment of real industrial wastes with a cell specially designed to attain high efficiency in the removal of pollutants.
In heterojunction silicon with intrinsic thin layer (HIT) solar cells, the excellent opto-electrical properties of indium tin oxide (ITO) front contact play a critical role in attaining high efficiency.
The uses of soft switching techniques, [3 6] zero voltage switching (ZVS) or zero current switching (ZCS), is an attempt to substantially reduce the switching losses and hence attain high efficiency at increased switching frequency.
In order to attain high efficiency and stable radiation, TE31,12 mode that lies in a relative sparse spectrum is selected as the operating mode and the beam-wave coupling coefficient, and start oscillation current are calculated by a set of source codes.
