The phrase "attained values" is correct and usable in written English.
It can be used when discussing values or principles that have been achieved or reached, often in a context of personal growth or organizational goals.
Example: "Through hard work and dedication, the team has attained values that reflect our commitment to excellence and integrity."
Alternatives: "achieved values" or "realized values".
Eight days after refeeding, all variables except total lactase had attained values found in normally weaned age-matched controls, including absorptive capacity for sucrose.
The PI-3 virus and PI-3 antigen production among the cultures was not significantly different and attained values ranging from, respectively, 7 9 log10 TCID50/mL and 1.5 2.2 OD.
The two levels of plant water status were obtained by supplying irrigation when the pre-dawn leaf water potential of the control treatments attained values of −0.3 and −0.6 MPa.
With both ZVI and the combined system (TiO2 + ZVI) final As concentrations of 5 and 3 μg L−1 were respectively attained, values below the WHO recommended limit (10 μg L−1) for arsenic in drinking water.
In addition, the microhardness of vacuum heat-treated particle-free NiP coatings attained values of 1200 HV, while the composite NiP TiO2 coatings acquired an even higher microhardness, exceeding 1450 HV.
The loss of effectiveness of the CFRP system occurred when the average temperature in the adhesive at the CFRP anchorage zones attained values ranging from 2.2 to 5.6 times its glass transition temperature (Tg).
Our findings show that the maximum attained value (Cmax) for unconjugated dBPA in serum at 1 hr after feeding was 3.95 ng/mL on day 1 and was 4.40 ng/mL on day 7 (Table 1).
There the wedge angle can attain values around 45°, and the assumptionk0r⪢1 cannot be made.
The electrical conductivity of the composites increased with increasing xGnP loading (attaining values 0.75 S/cm with the addition of 2 wt.% of xGnP).
The resulting weld creep strength factor (WSF) is then attaining values well below 0.8 when extrapolated to typical design life of 100 000 h or more.
Power block efficiencies can reach 0.50 and overall plant efficiency can attain values about 0.40 working with air or carbon dioxide.
