The phrase "attained strength" is correct and usable in written English.
You can use it when discussing the process of gaining power, resilience, or physical capability over time.
Example: "After months of training, she finally attained strength that she never thought possible."
Alternatives: "gained strength" or "achieved strength."
The numerical results are in very good agreement with the corresponding experimental measurements, as regards both the linear and non-linear region, and the attained strength.
Comparisons are carried out amongst the composites and with the corresponding unreinforced alloys and are mainly focused on the attained strength and ductility levels as influenced by damage accumulation and fracture mechanisms.
Using idealized tree linear force displacement curve of specimens based on significant change in stiffness to define elastic stiffness and yield displacement (y) and also strength drop to 20% from the maximum attained strength as ultimate strength, it is easier to compare the capacity curve of specimens (Fig. 7 and Table 4).
From Figs. 12 and 13, CA 0.5, CA 1.0 MS 0.5 and MS 1.0 attained strength of more than 70 N/mm2, however, CA 0.5 and CA 1.0 attained it at 90 days while MS 0.5 and MS 1.0 attained at 180 days.
Unlike the thermally cured geopolymers, ambient cured geopolymers attain strength with age.
By 1200 UTC on September 25, Frieda attained hurricane strength, and reached peak intensity with winds of 80 mph and a minimum pressure of 992 mbar (hPa; 29.30 inHg), as reported by the Canadian merchant ship Irvingbrook.
SP3-R specimen attained maximum strength at 2.2% drift ratio and first degradation in strength was observed at the second cycle of 3.5 drift ratio as shown in Fig. 16f.
There must be at least two handstands in an exercise, one attained by strength and the other utilizing swing.
By war's end, the Air Service had attained a strength of 195,000 officers and men and had organized 45 squadrons with a complement of 740 planes.
It was observed that some of the blocks attained considerable strength within 24 h under ambient conditions.
A comparison of CA concretes (Fig. 12) and MS concretes (Fig. 13) with the control shows that CA concretes attained high strength earlier than MS concretes and the control.
