Sentence examples for attain process from inspiring English sources

The design space is reliable and working within it can attain process CQAs criteria with a high probability.

As an example, operating a 20 theoretical stage column at 70 °C and 11.2 MPa, it is possible to attain process specifications with a solvent to feed ratio of about 63.

Normal operation ranges to attain process CQA criteria with a probability more than 94% are recommended as follows: EC of 84.0 86.0%, AEA of 5.0 7.0 mL/g, ET of 7.0 8.0 h, and EF of 2. Verification experiment results showed that operating EC, AEA, EF and ET within design space can attain CQA criteria.

The proportion of people with type 1 diabetes attaining process targets was greater than 70% in 2007, with the exception of testing for microalbuminuria.

Here thejourney to attain the process potential capability index (Cp) and the process performance capability index (Cpk) values greater than 1.33 is elaborated by identifying the rootcause through quality control tools like the cause-and-effect diagram andexamining each cause one after another.

Simulation allowed not only to understand the complex fluid dynamics that describes the system, but also to optimize the reactor configuration in order to attain good process performance.

To attain this process, a stream of crude extract of laccase (with a protein concentration of 0.178 mg mL−1) in 0.1 M phosphate buffer (pH 7.0) purged with high purity nitrogen was driven into the fluidic microsystem.

Besides, manufacturing with the attained optimal process parameters can reduce the opportunities of repair and rework of Cr thin-film and raise the yield.

During such optimization, the additional investigation for selecting a proper SMB port configuration, which could be more advantageous for attaining better process performances, was carried out between two possible configurations.

Improved fermentation strains currently available are not sufficient to attain a profitable process design without implementation of advanced processing techniques.

In order to attain a proper process design, pressure and temperature of the hydrate formation should be estimated.