The results showed that there was an optimum inhibitor concentration at which the maximum inhibiting efficiency, IE, was reached.
Figure 3d also shows that each film thickness has a unique optimal dye adsorption time at which the maximum conversion efficiency occurs.
The amount of ( F^ ) adsorbed increases with time and reached its steady state in 120 min at which the maximum adsorption efficiency (86%%) and maximum adsorption capacity (1.72 mg/g) were achieved (Fig. 1a).
In addition, the possible significant correlation between these variables and removal efficiency was studied from which the maximum efficiencies were obtained at 5.57 mg/L, 51.49 °C, 0.018 g and 10.73 min corresponding to metal ions concentration, temperature, CSG-BiPO4/FePO4 and sonication time, respectively.
The absorber-evaporator is an important component in the DAHT system, and there exists an optimum absorber-evaporator temperature (OAET) at which the maximum coefficient of performance (COP) and exergy efficiency (ECOP) can be obtained simultaneously.
The results indicate that an optimal liquid velocity exists that corresponds to the minimal bubble coalescence at which the breaker efficiency is maximum.
And the regenerative temperature at which the system electricity efficiency reaches its maximum is smaller than that at which the ORC efficiency reaches its maximum by 12 21 °C.
Predictions of the SMA actuator performance indicate that there is an optimum spring stiffness at which the energy efficiency of the SMA actuator is at its maximum.
Dr. Smolin's conjecture can be tested, he says, by trying to imagine a universe with laws that generate black holes even more efficiently than our own, which, he said, should be near the maximum efficiency.
The maximum efficiency of 38% is achieved at 515 nm, which is comparable to the competitive solar cells built from ZnO nanoporous film on rigid substrates [28].
