Your English writing platform
Discover LudwigExact(6)
The specimen's extension at the ultimate strength region.
The strain at the ultimate strength is 0.002, and the ultimate strain is defined as 0.004.
It is shown in this study that the results of these tests can be used to arrive at the ultimate strength of the rock mass.
They found the stress increase in the unbonded strands (Δf ps ) at the ultimate strength of the post-tensioned LWC beam was higher than that of the post-tensioned NWC beams under same reinforcing index values.
It is found that the effective width at the ultimate strength is larger than that at the serviceability stage and simplified design formulae are correspondingly suggested for the ultimate strength design.
Based on these simplified formulae and some assumptions commonly used, the effective width of the concrete slab and the depth of the compressive stress block of composite beams with varying parameters under sagging moments are analytically derived at the ultimate strength limit.
Similar(54)
Between these temperature ranges, the tensile strength decreased by a small amount, while at 300 °C the ultimate strength was approximately 50% of the room-temperature strength.
The plastic yield strength here is the stress at a 2 percent strain; the ultimate strength, as stated above, is the highest point (stress) on the stress-strain curve.
The modulus is calculated using the slope of the secant line at about 40% of the ultimate strength (secant modulus of elasticity).
The test results demonstrate the very significant ductility of the beams, with substantial interface slips being developed and sustained at loads close to the ultimate strength limit state.
The interstitials content does not have notable impact on the tensile strength at room temperature and 373 K. But, at 473 K, the minor change in sulfur content from 0.03 to 0.061 at.% raises the ultimate strength by 150 MPa while the boron doping further improves the tensile strength.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com