Sentence examples for at the maximum strength from inspiring English sources

While the analysis result of the strength of prism specimens was similar to the test result, even if the strain at the maximum strength was little bit smaller than the test result.

It reaches 2%% of the maximum compression strength of the block, and the total average value without considering the compression strength change of the block was about 80%% of the strain when the strain at the elastic limit was at the maximum strength.

At the maximum strength of 587 mT, a reversible reduction of vRBC (40%) and of functional vessel densities (FVD) (15%) was observed.

If the cost function is linear, the control policy is bang-bang, which suggests implementing NPIs at the maximum strength or not implementing at all as shown in Figure 2. If the cost function is nonlinear, for example the quadratic cases presented in Figure 4, the control policy has multiple levels, which requires varying the NPI strengths as the system evolves from one state to another.

However the major drop of strength occurs as a result of yield of the 4th story beam, and the residual strength is larger than that of the model SD. Figure 15 depicts the maximum inter-story drifts of the model structures at the point of the maximum strength and at the maximum inter-story drift of 2.5% obtained from pushover analysis.

In Fig. 5, it is observed that increasing of lime content causes significant improvement in compressive strength of the soil at in all of the pozzolan contents, and the maximum strength is achieved at 5% lime approximately.

MONO specimen attained the maximum strength at 1.75% drift ratio.

The optimal ratio (75%% fine sand, 25%% cement) was determined to obtain the maximum strength at a minimum curing time.

However, it can be inferred that the positive effects can outweigh the negative effects even above the eutectic temperature, thereby realizing the maximum strength at such relative high temperature levels.

For nanotwinned copper a grain size of 500 nm, the model predicts a critical twin spacing for the maximum strength at 13 nm, in excellent agreement with experimental observations.

The maximum strength is seen at the energy of 10 J impact loading.