Sentence examples for at the maximum operating from inspiring English sources

The flash point should be high enough to allow safe operation and minimum volatilization at the maximum operating temperature.

Life estimation methods according to standards, e.g. ASME Code N47 and TR, assess the influences of creep and fatigue separately under the assumption of isothermal conditions at the maximum operating temperature.

The overall software execution time attests around 42 s, when the processor runs at 60 MHz (i.e., the maximum operating frequency of the LEON3 processor implemented on the selected FPGA device).

There is a present and future need for ultra-high temperature alloys which are strong at temperatures at least 200°C above the maximum operating temperature of nickel-base superalloys.

LRT has at least five different categories of operational alignments all of which have criteria for the type of warning systems needed at intersections based on the maximum operating speeds.

In addition, with the ternary mixture the initial generation temperatures resulted to be up to 5.5 °C lower than those obtained with the ammonia/lithium nitrate mixture, at the same time the maximum operating pressures were around 1.5 bar higher.

At that point it had become clear that the speed limits on the rail network were mostly too low for the trains to run at their maximum operating speed, even though they were chosen specifically to prevent the costly work of straightening existing lines.

Each possession followed a visible logic, even at maximum operating speed.

Positron annihilation lifetime (PAL) spectra were registered using fast coincidence system ORTEC of 230 ps resolution (the full width at half maximum) operated at high-stabilized normal measuring conditions.

Various researchers working over the past decade, including some at Princeton like George McClendon, now at Duke University, and Stacey Springs, now at the Massachusetts Institute of Technology, fleshed out the workings of these proteins, finding that they were often turned on to the "maximum" position, operating at full tilt, or at the lowest possible energy level.

Reducing tip clearance both improves performance and reduces noise, not only at the maximum efficiency operating point but also in an appreciable low flow rate operating region.