The phrase "at the maximum efficiency" is correct and usable in written English.
It can be used when discussing the highest level of efficiency achieved in a process or system.
Example: "The new software allows us to operate at the maximum efficiency, reducing processing time significantly."
Alternatives: "at peak efficiency" or "at optimal efficiency".
The performance characteristics of the STPVC at the maximum efficiency are revealed.
To maintain the safety of the entire facility, plant scale detritiation systems will also continuously run to remove tritium from the effluents at the maximum efficiency.
Reducing tip clearance both improves performance and reduces noise, not only at the maximum efficiency operating point but also in an appreciable low flow rate operating region.
The optimal values of the band gap energy and electron affinity of the cathode material at the maximum efficiency are determined, and consequently, the operating temperatures of the cathode and anode electrodes can be optimally designed.
The choice of the adsorbent matrix must be made cautiously, aimed at guaranteeing the maximum efficiency of the composite formed (matrix/pheromone) without contributing to the degradation of the pheromone during its preparation or storage [7].
At pH 7, the maximum efficiency was shown by bean with 1.5 mg/l dosage (85.37%) followed by bean and sago with 1 (82.49%) and 1.5 mg/l (82.49%), respectively.
The maximum pressure increase generated is 2.82 kPa at 6 A DC; the maximum efficiency is 0.46% at 2 A DC, where the flow rate is 40 ml/min.
A temperature controller stage is designed in conjunction with the MEPT-FL in order to operate the FC at low-temperature values whilst tracking at the same time the maximum efficiency point.
At constant vapor velocity, the maximum efficiency of separation for different initial velocities of droplet is the same.
In the boost mode, when V L = 48 V and V H = 400 V, the efficiency is 91.3% at full load, and the maximum efficiency is 94.7%.
