Sentence examples for at the interference level from inspiring English sources

This hybrid joint, generally realized by exploiting acrylic anaerobic systems, has been studied to evaluate the interaction between the tensile field of the components (at the interference level) and the adhesive strength under both static and dynamic loading conditions.

The PDR decreases and the path hop count increases as the BG traffic transmitters are closer to the sender/receiver pair and as the interference level at the receiving end of each link becomes greater.

Especially when the interference level at each channel is relatively low (less than 0.3), the effective throughput nearly keeps the same level as no channel interference exists.

This constraint is usually defined by the interference level at the PU receiver and/or the outage probability, which is defined as the probability that the interference level is beyond a given threshold.

The signal's occurrence rates from any automatic detection algorithm depend on the selection procedure, parameters of detection, and the interference level at an observatory.

If (P^{k}_{p, n-1)} neq 0), n-1ferent decoding strategies for each SU are identified based on the interference level at each SU.

Generally, as P 0 increases, the uplink interference and user increase at the same time until the interference level does not exceed a certain value [3].

From (2) and (3), the interference level at the PU determined by path loss, (bar {I}_{text {PU}}), can be expressed as begin{array}rcl@ bar{I}_{text{PU}}=T_{text{SU}_{0},, text{max}}^{(Z }-C_{5}, end{array} (24).

We assume that the interference level at each receiver/client in our system model is in the weak interference regime, i.e., the interference is at 0

In [26], the authors pointed out that different receiving modes can be exploited at D2D receivers according to the interference level, and proposed a new method of exploiting a retransmission of the interference from the BS for middle interference level region.

In such methods, the limits on the interference level received at the PU receiver, normally referred to as interference temperature, can be considered to be long-term average or short-term peak constraints.