Your English writing platform
Discover LudwigSuggestions(2)
The phrase "at mid heights" is not standard in written English and may cause confusion.
It could be used in contexts discussing measurements or positions, but it is better to clarify the intended meaning.
Example: "The artwork should be displayed at mid heights to ensure visibility for all viewers."
Alternatives: "at medium height" or "at average heights".
Exact(1)
For all fuels, the size distributions evolve from a single nucleation mode low in the flame through a bimodal distribution at mid heights and finally a single accumulation mode.
Similar(59)
Every column specimen was equipped with eight thermocouples to measure the temperature distributions inside the specimen at mid height.
The Blue-headed Vireo forages mainly at mid height in a forest, moving slowly among branches from which much of its food is secured.
The circumferential strains at mid height for the various specimens over time are shown in Fig. 9.
Two horizontal LVDTs (L3 and L4), placed 90° apart, were used to measure the lateral displacements at mid height of the column.
Circumferential expansion of each specimen undergoing accelerated corrosion was determined using a specially fabricated mechanical expansion collar fitted at mid height of the column.
The extensometer included an aluminum ring located halfway between the two compressometer rings and fixed at mid height of the test specimen.
Iqbal et al. (2014) investigated BWR Mark III type nuclear containment subjected to the same aircraft and reported the maximum deformation of 74.52 mm at mid height of containment while 36.34 mm at junction of dome and cylinder.
AP analyses is carried out for parking story, story with public area, first story, story directly below the roof, story at mid height and story above the location of a column splice or change in column size.
The reported axial and hoop strains represent the maximum values corresponding to F u. Axial and hoop strains are calculated using axial and circumferential displacements at mid height of the column, obtained from the L1 and L2 readings, divided by the relevant gage lengths.
This was accompanied by substantial increases in both axial (5 6 times for CH2 specimens and 4 5 times for CH3 specimens) and hoop strains (6 11 times for CH2 specimens and 5 9 times for CH3 specimens) measured at mid height of the columns.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com