Sentence examples for at low cycle from inspiring English sources

To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations.

At low cycle numbers the frictional sliding track of the as-received 304 stainless steel meanders and forms slip bands adjacent to the sliding track.

Nonetheless, it has two drawbacks when operated at low cycle periods: the emission of the volume without treatment present in the region close to the reactor input and an unavoidable reduction of the valve lifetime.

The appropriate value of Ω depends on the cycle time and to a lesser extent on the degree of isotherm non-linearity and the nature of the diffusion mechanism, varying from about 40 at low cycle times to 15 or even lower at large cycle times.

The cactus/polyester composites show a flexural modulus significantly higher compared to their tensile analogous, and large energy dissipation per unit volume at low cycles and high loading levels.

The objective of this study was to analyze the induced compressive residual stress (CRS) relaxation and redistribution during bending fatigue at low-cycle fatigue (LCF) and high-cycle fatigue (HCF) testing regimes of shot-peened 0.45% (annealed) carbon steel.

The damage calculations allowed to establish the increase of fatigue life at stress-controlled low cycle bending.

The experimental test results show that an increasing laser drilling speed caused a reduction in corrosion fatigue life by 35 50% at 850 °C, under low cycle fatigue regime.

The assembled cells with the poly S-r-UDOL @KB as a poly S-r-UDOL @KBaterial and lithium as a negative active material showed high discharge capoly S-r-UDOL @KBle asd low cycle performance under constant current charge-discharge conditions.

Outcomes from the application of this approach highlight the dominant charge storage mechanisms at both high and low cycle rates, as well as allow differentiation of 'capacitor-like' or 'battery-like' electrode behaviour.

The fatigue behavior of two alloys with different grain size was determined by means of uniaxial cyclic deformation tests under fully-reversed deformation (Rε= -1) at 400 °C in the low cycle fatigue Rε= -1.