The phrase "at low coefficient" is not standard in written English and may cause confusion.
It could be used in a technical context, possibly referring to a low coefficient in a mathematical or scientific discussion.
Example: "The material exhibits excellent thermal properties at low coefficient, making it ideal for insulation."
Alternatives: "with a low coefficient" or "at a low value".
The study showed that low solidity turbines with cambered blades operate at low coefficients of performance (CP) over a large range of tip speed ratios (TSRs).
Sampling parameters (i.e. grid size and counting frame size) were empirically determined to arrive at low coefficients of error (CE) for each measure.
As the material thickness increases, the material VOC time increase rate is smaller at high diffusion coefficient than at low diffusion coefficient.
An intact superficial surface permits normal operation of the synovial joint at an extremely low coefficient of friction, and any damage to the superficial cartilage zone may lead to rapid wearing of articular cartilage and subsequent cartilage breakdown.
First, performances of a basic ventilation system are simulated, which is operated at high regeneration temperature and low coefficient of performance (COP).
In dry tribotests against stainless steel ball, the coefficient of friction was less than 0.24 as Ti was less than 36 at.%, but abruptly increased to 0.39 as Ti reached 42 at.%. Extremely low coefficient of friction of 0.046 was obtained with oil lubrication.
A window with a low coefficient is better at blocking heat than a window with a higher coefficient.
The new coating exhibits a very low coefficient of friction at low humidity, a behaviour closely resembling that of the MoS2-based commercial reference, whereas the carbon based PVD coatings tested exhibit the reversed dependence of humidity.
At the same time, a lower meridional velocity at the impeller outlet is designed to improve the performance at low flow coefficient.
Studies on the modified propellers showed that the effectiveness of the blade modification was apparently stronger at low advance coefficient values and depended on the blade sectional profile.
