The phrase "at its maximum efficiency" is correct and usable in written English.
It can be used when discussing the optimal performance or productivity of a system, process, or individual.
Example: "The machine operates at its maximum efficiency when all components are properly calibrated."
Alternatives: "at peak performance" or "at optimal efficiency".
A wind energy conversion system can operate at its maximum efficiency only if it is designed for a particular site because the rated power and cut-in and cut-off wind speeds must be defined based on the site wind characteristics [12].
Furthermore, the system allows the fuel cell to operate at its maximum efficiency.
One of the main advantages of Continuous variable transmissions (CVT) is to reduce fuel consumption and emissions by running the engine at its maximum efficiency.
The IC algorithm was designed to control the duty cycle of Buck Boost converter and to ensure the MPPT work at its maximum efficiency.
That is the PV system will work at its maximum efficiency.
Vmax is the maximum rate of the enzymatic reaction (maximum turnover rate), and kcat reflects the turnover number of the enzyme, i.e. the number of molecules of substrate converted to product per unit time when the enzyme is working at its maximum efficiency.
In fact, the system allows the fuel cell to work most often at quasi-optimal conditions, near its maximum efficiency (i.e. at low/medium loads), because high external loads are met by the combined effort of the fuel cell and the ultracapacitors.
Its maximum efficiency at 20 keV, defined as the detected count rate divided by the incident particle current, is 5.4(2)×10−4, yielding a figure-of-merit, or analyzing power squared times efficiency, of 1.0(1.01.05.
However, the reformer operates near its maximum efficiency at low SSCR value and the higher the SSCR value, the lower the open circuit voltage and operating power density due to Nernst potential.
On the other hand, if there is no amplification (replication of cells that remain in any given compartment, ε = 1), the process works at its maximum limit of efficiency, without any reserves if a higher output of cells is temporarily required (e.g. infection or hemorrhage).
When the tube nozzle was asymmetric, the wall temperature difference was at its minimum, and combustion thermal efficiency was at its maximum.
