Sentence examples for at constant test from inspiring English sources
When the critical τ (τc) measured in this work for PBT was compared with those obtained in other toughened blends at constant test conditions and rubber properties, τc decreased as the modulus of elasticity of the matrix increased.
Recovery from inactivation of ICa was assessed by normalizing current amplitude at a constant test pulse (500 ms, −70 to 0 mV) to the constant prepulse value (500 ms, −70 to 0 mV) after various interpulse durations (50 350 ms, −70 mV).
The accumulated weight loss was measured and the wear rates were determined at constant normal test load of 20 N and constant pin velocity of 1.28 m/s during the pin-on-disc test.
Samples were annealed for 4 h in a furnace at constant temperature (test 3).
The dielectric constant tested at 1 kHz of these BTO Co films increases from about 10 40, by controlling the Co layer thickness.
Shear modulus predictions for 2D and 3D models were compared to the measured values to determine the effectiveness of each model type for the simulation of the shear frequency sweep at constant height (FSCH) test.
Thermal cycling tests at constant applied stress, mechanical cycling tests at constant temperature as well as complex thermomechanical tests were performed to determine the transformation conditions in a wide range of applied stresses and temperatures.
Mechanical testing at 1223 K and at constant strain rates (tensile tests) and constant loads (creep tests) of the single crystal nickel-base superalloy SC16 shows that after an initial hardening the alloy softens during deformation under all testing conditions.
Usually, there are two types of tests: tests at variable speed, and tests at constant speed.
In reciprocating tests of the spherical zirconia stationary specimen and the flat reciprocating artificial cartilage at constant load, the interruptive test with 2 s interruption at stroke ends showed larger wear than the continuous reciprocating tests for the same sliding distance.
A specific compressive fatigue test at constant load was designed in agreement with application to study the behaviour of SPU cylinders under such stress.
