"at a torque" is a grammatically correct phrase and can be used in written English.
It is typically used when describing the amount or level of torque (a measure of rotational force) applied to an object. Example: "The mechanic adjusted the machine's settings to operate at a higher torque for increased power output."
The implants were inserted by a surgical motor at a torque value of 25 N cm.
Then, the procedure of MSC, namely a reduction of microstrains generated in the engine of the rheometer at a torque value 50 nNm was performed, also in the same manner as that used for pressure measurements.
The ten human cadaver knees were tested in a knee-simulating machine at a torque of 30 and 40 Nm.
Prior to testing, each locking and cortical screw were tightened at a torque of 0.8 Nm or 0.4 Nm, respectively.
The continuously adjustable taper connections are locked intraoperatively with extension bolts at a torque of 25 Nm, using an implant-specific torque wrench.
Accordingly, at a torque of 30 Nm, a total decrease in contact area of 12.7% can be derived, as can a decrease in force of 17.2%.
Our thermophilic F1 is active over 0 90°C (14, 26), and it rotates at 4°C with a torque similar to that at higher temperatures (Fig. 7).
In addition, there was no clear pattern between the implant position and the fracture torque; half of the samples fractured at a lower torque when the tip of the implant was located at the middle of the window.
In steady-state rotation, the available wind speed which can generate a torque at the blade ((T_{text{cycle}})) is the relative speed between the wind speed and the circumferential speed of blade.
Contrary to the current state-of-the-art, which provides solutions at the kinematic level, a torque controller is designed, following the Prescribed Performance Control methodology, capable of additionally imposing a priori specified transient and steady-state performance attributes on the image feature coordinate errors.
Using a body weight of 75 kg at 50% BW a torque of 0.37Nm for the 1 mm decentralized position and 1.1Nm for the 3 mm decentralized position of the implant was calculated.
