Your English writing platform
Discover LudwigSimilar(60)
Fatigue tests of standardised uniform-gauge test specimens with duplex coating (plasma nitrided and hard PVD coating) were carried out in a low cycle regime at stress ratio R ≈ 0.05 at elevated temperatures of 150 °C and 500 °C.
The micro-hardness and corrosion resistance of the coating was enhanced at a low duty cycle and a high frequency (10 Hz in this work), which is related to the increasing amount of SiC particles deposited in the coating.
A high peak power density was obtained at a low duty cycle.
These sensor nodes are inexpensive and have a battery lifetime of several years on at a low-duty cycle.
To achieve a high part quality at low cycle times, the thermal behavior of the autoclave mold can be investigated by means of simulations.
Series of fatigue tests carried out in air at room temperature in the low cycle fatigue range show a significant improvement of the fatigue life.
The appropriate value of Ω depends on the cycle time and to a lesser extent on the degree of isotherm non-linearity and the nature of the diffusion mechanism, varying from about 40 at low cycle times to 15 or even lower at large cycle times.
The experimental test results show that an increasing laser drilling speed caused a reduction in corrosion fatigue life by 35 50% at 850 °C, under low cycle fatigue regime.
At low cycle numbers the frictional sliding track of the as-received 304 stainless steel meanders and forms slip bands adjacent to the sliding track.
Nonetheless, it has two drawbacks when operated at low cycle periods: the emission of the volume without treatment present in the region close to the reactor input and an unavoidable reduction of the valve lifetime.
The damage calculations allowed to establish the increase of fatigue life at stress-controlled low cycle bending.
More suggestions(2)
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com