Sentence examples for at a drain from inspiring English sources

The water table was either maintained at 0.6 m by a subirrigation (SI) system or was under free drainage (FD) at a drain depth of 1.0 m.

A 2 × 15 μm HEMT showed an extrinsic peak transconductance of 1130 mS/mm at a drain–source voltage of 2.0 V.

These drainage design and management modifications were evaluated against conventional drainage system installed at a drain depth of 1.20 m with free drainage at the drain outlet.

It is critical to understand that the use of pest strips for fly control at a drain or cockroach control by a grill line are not treating the problem, only the symptom.

A 2 × 35 μm HEMT exhibited a current gain cut-off frequency of 200 GHz and a power gain cut-off frequency of 310 GHz at a drain–source voltage of 1.1 V.

In addition, a high OFF-state breakdown voltage of 1200 V is achieved for a device with a gate-to-drain distance and field-plate length of 15 μm and 5.3 μm, respectively at a drain current of 1 mA/mm with a zero gate bias, and the substrate grounded.

An additional pMOST was introduced in the design as a drain load at the output of nMOST source follower.

Upon cooling from 300 K to 77 K, the dc transconductance gm was enhanced by 30% at a drain-source voltage VDS of 0.1 V.

To test this hypothesis we measured GHG fluxes over a four year period, at a drained and a rewetted organic soil under grassland, which were both grazed for the first two years and not grazed for the following two years.

Figure 2 shows the transfer curves (I D V GS) measured at 20 °C from the FET with a W/L of 30/10 μm at a drain-to-source voltage (V DS) of −0.1 V.

The dependence of the transconductance on the gate-source voltage of the single-gate ZnO MOSFETs and the multiple-gate ZnO MOSFETs operated at a drain-source voltage of 10 V was shown in Figure 4a,b, respectively.