The phrase "assembly jig" is correct and usable in written English.
It can be used in contexts related to manufacturing or engineering, specifically when referring to a tool or device that holds pieces in place during assembly.
Example: "The engineers designed a new assembly jig to improve the efficiency of the production line."
Alternatives: "assembly fixture" or "assembly tool".
The jig assembly consisted of a simple fixture attached to the platform of the testing machine and the screw-to-crosshead coupling fixture.
The setup of the testing machine, jig assembly, and synthetic bone was schematically shown in Figure 2. In the literature, Chapman et al. [ 4] propose an analytical formula to predict the pullout strength of a cancellous screw within synthetic bone.
Considering both product components and assembly associated tooling and jigging demonstrates the true propagating impact of design change.
The jig-plate assembly was subsequently fixed to the craniolateral surface of the femur by pulling the sutures through under the femur, allowing the assembly to be tightened to the femur.
Out of the various non-standard test procedures, Grigoriev et al. (1995) reported a novel test method called Pin-loading tension test (PLT) in which a section of the thin-walled tube itself can be loaded in combination with suitable jig and fixture assembly (Fig. 1) to generate meaningful fracture data.
The first phase has been completed and production equipment installed, whilst installation of the semi-automated jigs that will support assembly of the CSeries aircraft wings is also now under way in the second phase of the facility.
That eliminates the need for expensive jigs and tools on the assembly floor to hold parts in position while fitters file and trim in order to get everything to match.No-grow areaIt would be wrong to conclude from the gloom that American businesses will not soon muster again what Keynes called the "spontaneous optimism" that economies need in order to grow.
Before and after assembly, all parts, including ITO glass and Teflon jig, went through a cleaning process using acetone, 70% ethanol, and de-ionized water for 15 min. After assembly, the culture system was also sterilized by plasma cleaner for 5 minutes.
