Sentence examples for as discontinuity from inspiring English sources

Strut and Tie (S&T) models are used for the design of what are known as "discontinuity regions" in reinforced concrete (RC) structures.

The different methods applied, such as discontinuity analysis, geophysical surveys, drilling and packer tests, delivered results that were found to be in close agreement and led to the identification of the leakage zone.

Therefore, the critical microstructural parameter that strongly affects the fatigue resistance of the CrN coated samples investigated becomes the size of nonmetallic inclusions working as discontinuity inside the steel substrate, close to the location of the coating/substrate interface.

Structural mapping delineated a total of 55 normal and reverse (antithetic and synthetic) faults from the seismic sections (Fig. 9) which were identified as discontinuity and abrupt termination of coherent seismic reflection events with the aid of semblance seismic attributes (Brown 1986).

In addition, numerical or analytical methods of solutions depend on the geometry of the reservoir, fluid flow type (Linear, Radial and Spherical), fluid flow regime (Transient, Late Transient, Steady State, Semi-Steady state), as well as discontinuity (conductive discontinuity with different permeability, sealed discontinuity with low permeability).

In the present study, power spectral density function has been expressed as [34] S varOmega_{s} ) = S varOmega_{0} ) times left( {frac{{varOmega_{s}^{{varOmega_{0}^ right)^{ - 2}, (8 where Ω 0 is referred as discontinuity frequency and is taken as 1/2π (rad/m).

Mr. Bernanke said that the new approach "will work, or not work, in much the same way that monetary policy — ordinary, more conventional, familiar monetary policy — will work" and that there was "not as much discontinuity as people think".

As discontinuities or porosity develop in the coating, galvanic or electrolytic action ensues; the iron or steel, however, is protected by sacrificial corrosion, a phenomenon in which, as long as the zinc and the iron are in contact, atmospheric oxidation spares the iron and affects the zinc.

The welding process also can introduce imperfections, which act as discontinuities and can cause stress concentrations.

Too large particles, on the other hand, act as discontinuities, again lowering the flexural strength.

These associations between chemical and biological similarity are studied as discontinuities in activity landscapes.