Two exponential fittings were used to present the decrease of the absorption band of the isocyanate group as a function of the curing time.
Experimental blended cements with the five zeolite-rich rocks were also prepared and the compressive strengths measured as a function of the curing time.
The fluorescence spectrum of 1- 4-dimethylaminophenyl -6-phenyl-1,3,5-hexatriene (DMA-DPH) dissolved in a stoichiometric mixture of diglycidyl ether of bisphenol A and diethylene triamine was measured as a function of cure time at various cure temperatures.
By using the hydration model, the evolution of properties of low-calcium fly ash blended concrete is predicted as a function of curing age and these properties are adopted as input parameters for the chloride penetration model.
The network formation process and resulting network structure were evaluated by in situ optical microscopy and current density measurements as a function of curing time.
The results of investigations into the cure of model anaerobic adhesives by measurements of the real and imaginary parts of the complex permittivity as a function of the cure time are reported.
The viscosity can also be expressed as a function of the cure degree, which is calculated from the kinetic parameters of the d.s.c.s.c
Measured friction coefficients were maximum at the start of the cure cycle and varied as a function of degree of cure and ramp rate owing to change in the tool part interface, cure shrinkage, resin/composite properties, residual stress, and mode of interface failure.
Heat generation term, expressed as a function of cure rate and the total heat generation due to cure reaction, is introduced to account for the effect of heat liberated during the process.
The initial intensity of charge recombination luminescence (CRL) emitted by epoxy resins after brief periods of UV irradiation during cure has been measured for a number of resins as a function of cure time.
