A pin-on-flat type test apparatus was designed and used to determine the friction coefficient as a function of the initial surface texture, the contamination by five different aircraft operating fluids, as well as the contact pressure.
The external dose resulting from the air contamination of Co-60 was evaluated, and its contribution was analyzed with time as a function of the location of a receptor and precipitation conditions at the time of the contamination event.
Figure 5 compares the depth profiles of the vapour phase concentrations of a representative gasoline compound (pentane) on Days 1, 4, 8, 12 and 15 after contamination in the lysimeter as a function of the gasoline composition.
In these simulations we also investigated three hypothetical contamination scenarios at stopover sites on migrations, as a function of the number of infectious virus units present in halt meshes.
In particular, when the contamination ratio was 50%%, the MSE average drastically increased because the contamination ratio amounts to the breakdown point of median (50%%). Figure 9 shows the MSE average as a function of the standard deviation of LOS noise (σ 1).
Contamination from outside the syringe represents spill-in at an exponential rate into the lumen as a function of the diameter.
We use the respective seawater blank analyses as our input solutions to directly correct for any trace metal contamination from the laboratory environment as a function of time (the experiments were not conducted in a Class 100 clean room).
A mitigation response of contamination, as detected by a sensor network is manifested in a decreased demand due to public information as a function of distance from the sensor.
For each case the extent of contamination is computed as a function of cover layer permeability and thickness, water table depth and soil surface pollutant contact time.
